JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft

Intorducing our self-priming stainless steel electric pumps with a built-in ejector. With a compact and elegant design, they are suitable for pumping clean water free from impurities in multiple applications.

Key Features:

SS304 stainless steel pump body.

Copper winding.

Brass impeller.

Stainless steel shaft.

Single-phase motors IP44 Class B.

Power options ranging from 0.5HP to 1.5HP.

Maximum liquid temperature +40°.

Built-in thermal protector.

Maximum suction capacity of 29 feet .

Low noise operation.

Suitable for continuous use.

Recommended Applications:

-Home pressurization systems.

-Vehicle washing.

-Light industrial services.

-Aspiration in open wells and cisterns.

-Small irrigation projects.

Performance curve.

Technical Data. 

Installation scheme

Quick Start Guide
1. Measure the distance from the water level to the pump. This pump will lift water from a depth of 0 to 25 feet only.
2. Set the voltage switch on the pump to the same voltage as the power source.
The pump is factory wired at the factory for 230 V.
3. Connect the pump to the pipeline.
4. Make sure the foot valve is at least 10 feet below the water level and 5 feet above the bottom of the well.
5. Prime the pump by filling the pump cavity with water. IMPORTANT: All pumps must be primed before operating.
6. Turn the pump on at the switch.
CAUTION: If water does not flow, turn off the pump and check all plumbing connections for leaks. Prime again."
7. Be sure to read and understand the instructions before installing or operating this pump.

Will need
Pipe and accessories
1-1/4 in. faot valve 1 in. discharge tee
galvanized bushing
Manometer or pipe plug Pressure tank