No Products in the Cart
• Model 4S2342M
• Stainless Steel Impellers
• 836Ft Max
• 13GPM Max
• Single Phase
• 230 Volt
• 60 Hz
• Discharge 1-1/4”
• 3 Wire + Ground w/ Control Box
Deep Well Submersible Pump, Motor, and Control Box
(Package includes, The Stainless-Steel Impeller Body Pump, 304 Stainless Steel Motor w/5-10Ft wire, and control box.) This is a 3 Wire plus Ground Pump (Everything is Brand New)
Pump and Motor may arrive disconnected to prevent damage during shipping.
This is our premium line of submersible deep well pumps featuring stainless steel impellers. These provide more pressure and/or GPM than the regular, traditional Noryl or fiberglass impellers. Allowing them to reach a 30% additional foot head using the same horsepower and are more resistant to regular long-term wear and tear.
It's designed to draw water from drilled deep wells, ponds, etc. Ideal for sprinkler lawn irrigation, tap water, elevated &cistern tanks, filling pressure tanks, and industrial & farming water.
SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!
This is our Stainless-Steel Impeller Deep Well Pump which is ideal for the Supply of fresh water to rural homes, farms, and cabins that have 4-inch and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come.
-The pump has an emergency thermally protected motor with a 95°F maximum work temperature to keep it from overheating while in use.
-The 3-wire + ground wire design provides a control box for easy provision and energy efficiency.
-The outlet is also made from stainless steel and not iron or brass like lesser quality pumps.
-The submersible well pump is easy to install and extremely versatile.
-Heavy-duty stainless-steel body fit for home usage and industrial.
-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps. This pump lasts much longer than the all-plastic-bottom-suction pumps.
-This pump model features a built-in check valve; however, this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function.
-When using the pump with a pressure tank, a minimum requirement of at least 1 external check valve must be used. (Install a check valve in the first piece of pipe closest to the pump)
NOTICE: Our pumps are checked for physical damage before they're shipped. As soon as you receive it check for any damage that might have occurred during shipping, and please report it if you see any.
NOTICE 2: This pump is designed to be used in clear, pure water only, even a small amount of sand diluted in the water will damage it, make sure your well, pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.