No Products in the Cart
Non-clogging sewage drainage pump prevents the blockage of the pipes. Protects the environment. Patented designed, assembled, and tested in the USA.
Stainless steel shell SS-304 .
SS-304 stainless steel barrier strategically located to filter wet wipes, feminine products, tampons, pads, baby wipes, and diapers.
Open stainless-steel impeller made with SS-304.
Built-in flap-type sewer check valve, which allows passage of whole solids up to 1 "
Built-in air relief valve.
Pumps solids up to 1 "in diameter.
Protects against clogging from sedimentation. Protects against the entry of common objects such as; Toilet bowl cleaner sanitizing, baskets, tablets, gloves, bags, toys, ropes, nails, bolts, wires, cables, cans, rigid plastics, metallic sponges, rags, silverware, etc.
Pump motor casing made of SS-304 stainless steel.
Cast iron parts with nickel plating.
Copper winding motor. Insulation class F.
NSK Ball bearings.
Thermal Overload Protector.
Pump Specifications |
SEW07511A |
| Capacity [h – US GPM] | 73 GPM (292 Lpm) |
| Head [ft.] | 36 ft (10,9 m) |
| Impeller diameter [in.]/type | 4″ |
| Solids Handling | 1" |
| Cable lenght | 20 Ft (6 m) |
| Weight (without cable) [lbs.] | 54 LBS |
| Outlet | 2"NPT |
| Float switch | Yes |
Electric Motor |
|
| Power [kW-HP] | 0,56KW-0,75 HP |
| Voltage [V]/Current [A] | 115V- 5.2A |
| Phase | 1 |
| Frequency [Hz] | 60 Hz |
| Speed [RPM] | 3450 RPM |
| Insulation class | Class F |
| UF/V Capacitor size | 35 / 250 Uf/v |
|
Protection |
Auto reset thermal overload |
| Power cable 20m (IEC 60245- 4) | 20 Ft (6 m) |
Materials |
|
| Casing | Stainless Steel SS-304 |
| Motor housing | Stainless Steel SS-304 |
| Impeller | Stainless Steel SS-304 |
| Main shaft | Stainless Steel SS-304 |
Seals/Lubricant |
|
| Upper & lower bearing | NKS 204 & NSK 202 |
| Impeller side seals | Graphite & Ceramic |
| Oil type | Cooling Oil Filled |
Built in SS 304 stainless steel with a thickness of 1.5mm. It was designed for the passage of solids, mainly organic waste and human waste. The layout of the drilling holes has been specially designed for the passage of decomposed fecal matter and degraded by contact with water.
The perforations are distributed in such a way that in the lower area (next to the suction area) their size decreases, preventing heavy solids such as wires, glass, irons and other large objects from entering. This patented shell is designed for one of the pump's most demanding moments; the start-up. This is when the pump demands maximum power, when sediment and solids accumulate in the intake, it could lock the turbine and block the motor. The shell avoids this extreme situation by removing any risky solid from the pump's impeller and avoiding sedimentation inside of it.
Why not take care of what is ours? GALIM USA™ LLC. Reinvented the concept of sewage pumping. The industry strives to pump more and more without caring what it sends to the plants, it saturates them with elements that they cannot process. GALIM USA™ LLC. Sewage pumps are designed to allow the passage of organic solids, the rest of the elements remain in the tank. Organic material is not what causes the jamming on the pipes, causing great damage to properties and loss of property. GALIM USA™ LLC. is the solution to taking care of the planet and to reduce the emission of greenhouse gasses and avoid large costs.
Our pumps were designed, developed, tested, and assembled in the USA under the highest quality requirements ensuring a fluid, after-sales assistance, and confidence guarantee.
*NOTE: Images are illustrative and may not reflect the actual product.
