JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper – Premium Pumps USA
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage
  • SKU: JET150

JET150. Shallow Well JET Pump, Self Priming 1.5 hp, 115/220 V, Cooper Winding, 161ft Head, 18.5gpm Flow, S. Steel Shaft, Pressure Switch, Double Voltage


The JET line is a family of self-priming pumps with a built-in ejector with high suction capacity. They are multivoltage and come equipped with a pressure switch that facilitates their operation and installation.

 Cast iron pump body and support

PPO Booster

stainless steel shaft

Copper winding

Single-phase 60hz MULTI-VOLTAGE motors I 44

Maximum liquid temperature +40°

Built-in thermal protector

Suitable for continuous use

Recommended for:

-Aspiration in open wells, cisterns

-Home pressurization

-Vehicle washing

-Light industrial services

-Small irrigation

 

 

Pump Specifications

Capacity [h – USGPM]

18.5

Head [ft.]

161

Impeller/ type

Brass

Weight (without cable) [lbs.] 

33.9

Outlet

1"

Inlet

1"

Electric Motor

Power [kW-HP]

1kw-1.5hp

Voltage [V]/Current [A]

110 v/ 230v

Frequency [Hz]

60Hz

Speed [RPM]

3450

Insulation class

B

Protection

IP44

Materials

Casing

Cast iron

Motor housing

Aluminium

Main shaft

Stainless steel

Performance curve.

Technical Data.


Exploded view.

 

Multi Voltage 110/230v.

 

Installation scheme

Quick Start Guide
1. Measure the distance from the water level to the pump. This pump will lift water from a depth of 0 to 25 feet only.
2. Set the voltage switch on the pump to the same voltage as the power source.
The pump is factory wired at the factory for 230 V.
3. Connect the pump to the pipeline.
4. Make sure the foot valve is at least 10 feet below the water level and 5 feet above the bottom of the well.
5. Prime the pump by filling the pump cavity with water. IMPORTANT: All pumps must be primed before operating.
6. Turn the pump on at the switch.
CAUTION: If water does not flow, turn off the pump and check all plumbing connections for leaks. Prime again."
7. Be sure to read and understand the instructions before installing or operating this pump.

Will need
Pipe and accessories
1-1/4 in. faot valve 1 in. discharge tee
galvanized bushing
Manometer or pipe plug Pressure tank

 

 

 

 

RELATED PRODUCTS

} .hidden { display: none; }
No reviews