JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pum – Premium Pumps USA
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft
  • SKU: JET 150s

JET 150s Shallow Well Jet Pump, Self Priming, Stainless Steel Body Pump, 1.5 Hp, 230v, Cooper Winding, 138ft Head, 18.5gpm Flow, 304 S. Steel Shaft

 

Self-priming stainless steel electric pumps with built-in ejector. With a compact and elegant design, they are suitable for pumping clean water without impurities in multiple applications.

SS304 stainless steel pump body
PPO Booster
Ejector and Venturi kit in PPO
stainless steel shaft
Copper winding
Single-phase motors IP44 Class B
Maximum liquid temperature +40°
Built-in thermal protector
Low noise
Suitable for continuous use
Recommended for:
-Home pressurization
-Vehicle washing
-Light industrial services
-Aspiration in open wells, cisterns
-Small irrigation

Pump Specifications
Capacity [h – USGPM] 18.5
Head [ft.] 138
Impeller/ type Brass
Weight (without cable) [lbs.]  29.6
Outlet 1"
Inlet 1"

Electric Motor

Power [kW-HP] 1kw-1,5hp
Voltage [V]/Current [A] 230 v
Frequency [Hz] 60Hz
Speed [RPM] 3450
Insulation class B
Protection IP44

Materials

Casing Stainless steel
Motor housing Aluminium
Main shaft Stainless steel

Performance curve.


Technical Data. 


Installation scheme

Quick Start Guide
1. Measure the distance from the water level to the pump. This pump will lift water from a depth of 0 to 25 feet only.
2. Set the voltage switch on the pump to the same voltage as the power source.
The pump is factory wired at the factory for 230 V.
3. Connect the pump to the pipeline.
4. Make sure the foot valve is at least 10 feet below the water level and 5 feet above the bottom of the well.
5. Prime the pump by filling the pump cavity with water. IMPORTANT: All pumps must be primed before operating.
6. Turn the pump on at the switch.
CAUTION: If water does not flow, turn off the pump and check all plumbing connections for leaks. Prime again."
7. Be sure to read and understand the instructions before installing or operating this pump.

Will need
Pipe and accessories
1-1/4 in. faot valve 1 in. discharge tee
galvanized bushing
Manometer or pipe plug Pressure tank

 

 

 

 

RELATED PRODUCTS

} .hidden { display: none; }
No reviews