Schraiberpump 4C306WPP - 4" Deep Well Submersible Pump 3/4HP 115V 203FT 80PSI max 21GPM 2 wire

• Model 4C306WPP         
  
• 0.75 HP (3/4 HP)
  
• 203 Ft Max
  
• 21 GPM Max
  
• Single Phase
  
• 115 Volt
  
• 60 Hz
  
• 12 Amps
  
• 2 Wire + Ground
  
• 1-1/4 Discharge

Deep Well Submersible Pump (2 wire +Ground) - 2-wire, direct start model - no control box required. 115 Volt 

Our stainless steel submersible 3/4hp, 203ft, 21GPM, 115v, 60Hz pump is designed to draw water from drilled deep wells, borehole wells, artesian wells, ponds, and lakes. Ideal for sprinkler lawn irrigation, household tap water, swimming pool filling, elevated and cistern tanks filling, water fountains, industrial and farming water supply, and agricultural irrigation. Can also be used with pressure tank systems due to its high foot head and excellent performance. Free shipping and 1-year warranty.

• Submersible Deep Well Pump. 115 Volts
• 3/4 HP 203Ft head 80PSI Max 21GPM
• Upgraded 2022 model with new axial load design provided additional pressure and GPM.
• Sturdy stainless steel casing to ensure a prolonged lifespan.
• 2-wire, direct start model - no control box required.
• One year warranty

SUBMERSIBLE WIRE SPLICE KIT INCLUDED WITH EVERY PUMP PURCHASE!

IMPORTANT: THIS PUMP DOES NOT REQUIRE A CONTROL BOX! & is 115 Volts

Our Deep Well Pump is ideal for the supply of freshwater to rural homes, farms, and cabins that have 4 inches and greater diameter drilled wells. It is a durable workhorse that will keep you in flow for years to come. Brand new pump in the box! NOT 'Manufacturer Refurbished'.

-The pump has a thermally protected motor with a 95°F maximum work temperature to keep from overheating while in use.

-2-wire + ground wire design for easy provision and energy efficiency.

-Stainless steel casing keeps this pump sturdy and functioning for years.

-The submersible well pump is easy to install and extremely versatile.

-Patented impeller design provides high flow up and high head, for better performance and longer life than most other well pumps.

-This pump model features a built-in check valve, however, this check valve is only used to prevent water from going back in the pump and causing backspin of the impellers, but if you are going to use the pump in a pressure system YOU NEED TO USE AT LEAST ONE EXTERNAL CHECK VALVE IN THE PIPE, the valve in the pump won't fulfill that function. Install external check valve right above the pump (as close as you can get it, in the first piece of pipe)

-1-year warranty.

NOTICE 2: This pump is designed to be used in clear pure water only, even a small amount of sand diluted in the water will damage it, make sure your well pumps clear water before you install it, this is important because damages caused by sand are not covered by the warranty.